
18
1. “ON/OFF” switch 6. “Sleep mode”
• Press to start the air conditioner unit. • Press button to activate the sleep function
• Press again to stop the unit. This function can only be activated under
“cool” or heating mode operation. When it is
2. Temperature setting activated under “cool” mode operation, the
• Set the desired room temperature. set temperature will increase 0.5°C after 30
• Press button to increase or decrease the minutes, 1°C after 1 hour and 2°C after 2 hours
set temperature. Setting range are between If it is activated under “HEAT” mode operation,
16°C to 30°C (60°F to 80°F). the set temperature will be decreased 0.5°C
after 30 minutes, 1°C after 1 hour and 2°C after
3. Operation Modes 2 hours.
• Press the “mode” button for select the type
of operating mode. 7. Air Swing
- Cooling Only : • Press button to activate the automatic air
COOL, DRY, FAN swing function.
- Heat Pump :
AUTO, COOL, DRY, HEAT, FAN 8. Sensor
(AUTO mode is represented by both • Infra red sensor to receive signals from
COOL and HEAT LED light on) wireless controller.
4. Fan Speed selection. 9. LED Display
• Press the button until the desired fan speed • To display the set temperature (in °C) and
is achieved. timer delay setting (in hours).
5. Timer. 10. Transmission source
• Press the set button to select the switch • To transmit signals to the air conditioner.
timer of the air conditioner unit (the setting
range is between 1 to 10 hours).
COOL
DRY
HEATMED
HIGH
AUTO
MODE
TEMP
SENSOR
ON/OFF
SLEEP
LOW
TIMER
8
2
3
4
1
FAN
FAN ON/OFF
TEMP
SLEEP
IMER MODE
7
1
2
3
4
10
7
SWING
SWING
FAN
SLM
AC-5300 (OPTIONAL)
Controllers
Comentários a estes Manuais